ServicesWhole-Home Filtration
Whole-Home Filtration in Kyle, TX
One filter on the main line cleans up the water for every faucet, shower and appliance in your home. We test your water first, pick a system that keeps up with your household, and hand you an upkeep schedule so filter costs never catch you off guard.

One system, every tap
The system goes in where your supply pipe enters the house, often in the garage or a utility closet. Every gallon runs through it before it reaches the kitchen, the bathrooms or the water heater. Most people call us about chlorine taste and smell. Some are tired of grit clogging aerators, and some just want the shower to feel better.
Before we recommend anything, we test. The results show what is in your water and what is not. If a whole-home filter fits, we say so. If an under-sink reverse osmosis system would cover what you care about for less money, we say that too.
It is easier to add filtration on your own schedule than after a fixture gives out or the water heater fills with buildup. If a remodel or heater replacement is on your list, tell us. We can line the install up with it so the pipes are only opened once.
What you get with the job
- Free water test
- Testing comes first and costs you nothing. We go over the results with you and explain what each number means for your home.
- Sized for how you use water
- Go too small and the pressure sags when the shower and the dishwasher run together. We match the tank or housing to your pipe size and to how many people in your home use water at once.
- Media matched to the test
- Carbon handles chlorine taste and odor in most homes. When the test turns up sediment, a prefilter goes in front so the carbon lasts longer.
- Bypass valve and tidy work
- A bypass lets you keep water running during service. Installation is free. We cover the floor where we work and leave the area clean.
- Upkeep schedule in writing
- We leave you a short list of parts that need changing and about when. Filter and media costs go in your budget ahead of time instead of showing up out of nowhere.
Signs your home could use whole-home filtration
Chlorine smell in the shower
If hot showers smell like a pool, the smell is in every tap, not just the kitchen. A carbon system at the main line takes care of it.
Grit in aerators and showerheads
Small bits of sediment clog aerators and wear out valves. A prefilter catches it before it reaches your fixtures.
Spots and film on glass and tile
White spots mean minerals. A filter may not be enough on its own, so the test tells us if you also need a water softener or a salt-free water conditioner.
A pitcher filter on every counter
If you are buying cartridges for three pitchers and a fridge, one system on the main line can cost less over a few years.
A big plumbing project coming up
A remodel or new water heater is a good time to add filtration. The pipes are already open and the work costs less.
What sets the cost
You don't pay for installation, so your cost is the equipment plus upkeep. Our quote covers both, including what replacement filters and media will run over time. You can budget for it like any other regular home maintenance.
Household size and flow
A home with several bathrooms and a full house of people pulls more water at once. That takes a larger tank or filter housing.
What the test turns up
A carbon-only setup is the simplest. A sediment prefilter, or pairing the filter with a water softener or salt-free water conditioner, adds equipment.
Location of the supply line
A line that is easy to reach in the garage takes less work than one in a cramped closet or coming up through the slab. Extra pipe or a new mounting spot adds to the parts list.
Filters and media over time
Prefilters get swapped more often than carbon media does. We lay out the schedule so you know the yearly upkeep cost before you commit.
What to expect from start to finish
- 1
Water test and walk-around
First we test the water and find where your supply line enters. Then you get a quote by phone or in person, with each part on its own line.
- 2
Pick your install date
You choose a day that suits you. Most jobs take a few hours, and the water is shut off only while we tie into the line.
- 3
Install, flush and retest
We mount the system, plumb in the bypass and flush it until the water runs clear. After a leak check, we test the water again so you can compare before and after.
- 4
Show you the basics
Before we leave, we point out the bypass, show you how to read the system and note the next filter change. The schedule stays with you on paper.

Common questions about whole-home filters
Will my water pressure drop after the install?
A properly sized system should not change how your water feels at the tap. Pressure loss usually comes from a filter that is undersized for the home. We size yours to your plumbing and to how many people use water at once.
Will it soften my water?
No. Carbon is there for chlorine taste and odor, and the calcium and magnesium that cause scale pass right through it. When the hardness reading on your test comes back high, we can look at pairing the filter with a water softener or a salt-free water conditioner.
Do I need a separate drinking water system too?
Plenty of people find the whole-home filter is enough. If you want an extra step at the kitchen sink, an under-sink reverse osmosis system is the common add-on. We will give you a straight answer on whether your water calls for it.
How often does it need service?
Sediment prefilters need changing more often, and carbon media lasts a good deal longer. Your water and your usage set the timing. We write it out so you can plan ahead.
What warranty comes with the system?
Our own warranty covers the systems we install: a lifetime warranty on tanks and ceramic discs, 5 years on the control valve, circuit board and filter media, and 1 year on labor. We go over the coverage when we quote your system.

Start with a look at your water
A free water test shows what your home needs and what it does not. From there you get a clear plan, a written upkeep schedule and free installation.